e
Trusscore: A User-Friendly DIY Sheetrock Alternative
No heavy lifting, taping, mudding, priming and painting required
While sheetrock is the incumbent wall and ceiling material, there's a lot of reasons not to like it. It's heavy, difficult to transport and fragile in transit. Cutting it is messy. Installing it is a multistep process consisting of screwing, spackling the screw heads, taping and mudding the seams, priming, and painting. And these headaches are magnified when you're doing a ceiling rather than a wall.
Trusscore is a sheetrock alternative made from extruded, 100% recyclable PVC.
Rather than coming in 4x8 sheets, it comes in 16" widths, in lengths of 8', 10', 12', 14', 16' or 20'. It's lightweight, making it easy for one person to install, even for ceiling applications. The sides are tongue-and-grooved; you screw the panels to your 16"-on-center studs, and the next sheet covers the screws of the previous sheet.
Once the panels are screwed in, that's it. It requires no taping, nor paint. It's durable, abrasion-resistant and easy to clean. It's water-resistant and can't grow mold or mildew. It has a Class A fire rating, and its acoustic properties are essentially the same as sheetrock's.
So what's the catch? There are three. The first is that it has a glossy finish, which might take getting used to in a residential setting.
The second is that it only comes in white or grey.
The third may or may not be a catch, depending on the size of your project. Trusscore costs $2.75 to $3.75 per square foot; a 4x8 sheet of sheetrock at my local big box runs $20, or just 63 cents per square foot.
Where the savings can come in is with labor costs; drywall crews aren't cheap, and installing sheetrock is a time-consuming process. Also, cutting out the finishing steps saves you from having to buy the extra stuff: Buckets of joint compound, taping knives, tape, primer, paint, paint rollers, et cetera. Plus with Trusscore there's little to no clean-up, versus the dusty mess that a sheetrock job brings.
The video below shows both the product, and a side-by-side time comparison of installing Trusscore vs. sheetrock:
Enter a caption (optional)
-
oFavorite This
-
Q6Comment
Directory Company Profiles
Core77
Industrial Design
Resources
Industrial Design
Resources
-
Core77 Directory
Find the Best Industrial Design CompaniesGo -
Bruce Mau DesignBMD is a multidisciplinary brand and design studio. At BMD, we are here to move organizations forwar...
-
Brainchild Engineering
Brainchild Engineering, based in Northville MI, is a product development and engineering company ded...
-
Springtime design
Springtime is a creative force that develops exciting, sustainable and paradigm-shifting products, b...
-
The Metcalfe Group, Inc.
Located in the greater Cleveland, Ohio area, we are an experienced full-service product design firm ...
-
Michael DiTullo
Design. Every. Thing. Creating innovative products and brand experiences. For more than 20 years Mi...
-
Design 1st Inc.
Hardware product design is a high risk business - unless you have a design partner who has done it s...
-
Zenpack
Your Full-Service Packaging Solutions Company We noticed a gap in luxury packaging companies: Clien...
K
{Welcome
Create a Core77 Account
Already have an account? Sign In
By creating a Core77 account you confirm that you accept the Terms of Use
K
Reset Password
Please enter your email and we will send an email to reset your password.
Comments
While technically true, calling plastic "recyclable" is misleading now that we know that so very little of it is actually turned into anything but garbage. At least PLA is recyclable. But I'm sure this could be done as a paper product, which could also be finished like sheetrock.
I'm sure renters will looove it when PVC walls are added to the "landlord special" palette /s.
Hideous.
I like the idea of it for spaces where the appearance is less an issue (e.g. garage or workshop). It would be much preferable if it had a non-gloss finish or if it could be painted (maybe future colors besides white and gray?). I'm curious if you could still drill holes or tap hanging nails to hang picture frames or light shelving that only goes through gypsum board. Seems like that could be another drawback.
I just love the ideation and problem solving process. And of course multiple things can be true, right?
Sure, it's technically "recyclable". But it's widely known now that used plastics are hardly ever actually turned into new products. At least PLA is compostable. And you could definitely make something similar, though perhaps less-durable, as a paper product. A paper version could also be finished as sheetrock.
That's a nifty one! I'd much rather have installed this, vs. re-taping and floating the drywall in my last house's utility room.
One major consideration, though, is the potential for condensation and mold growth if these panels are installed on the inward faces of exterior walls. In humid climates, where water vapor tends to move through exterior wall assemblies from the wetter outside towards the drier inside, mounting a vapor-impermeable material on an exterior wall creates a surface where vapor can condense and increase mold growth potential. This is very common in schools, for example, when a teacher hangs a laminated poster on an exterior wall, or in commercial kitchen or utility spaces when plastic wall panels are used over drywall as easy-to-clean finishes.