e
A Tool That Needs Designing: Something to Get Snow Off of Roofs
Last winter we looked at the Schneestop, a European roof-mounted invention for preventing snow buildup from falling off of a slanted roof. Because you don't want to be standing under it when this happens:
Or parked under a snowy roof when this happens:
Thing is, the roof-avalanche-preventing Schneestop is good for Alpine houses where the weight of heavy snow has been factored into the strength of the roof design. But the roof on your average American house may not be built to handle the weight. Also, if a roof is not properly vented, when snow builds up, the heat from the house can melt the underlayer into water. As that water runs downward, it freezes at the bottom, creating a potentially dangerous ice dam.
Enter a caption (optional)So in the spirit of better-safe-than-sorry, folks use a variety of contraptions to remove snow buildup from slanted roofs before it becomes a hazard. However, no one has designed a home-run product yet. There are roof rakes, like the Snow Cutter, and you can see how laborious it is to use below. (No need to sit through the whole video, ten seconds gives you the idea.)
Initially, this Avalanche Roof Snow Removal Tool seems to be a better design:
However, while they claim it works in "any amount of snow," in the first 20 seconds of this video below you can see it's not so easy:
This Swedish take on the design adds a clever vertical slicer that seems much more effective for higher piles:
The Snow Lance adds a second vertical:
However, all of these designs have one problem in common: The removed snow falls directly towards the user, which you can see in the first few seconds of this video, featuring a product of a similar design:
Some folks eschew these tools altogether, and instead clear one entire side of the roof at a time using a wire. You can skip the beginning of this next video and start watching at 1:20 to see it in action:
But that method, of course, requires you to climb up onto your roof to set the wire, something a lot of folks might not be comfortable with.
One guy who is comfortable climbing up on roofs also managed to clear one side all at once, though this was clearly not the plan:
Likewise for this woman—it doesn't take long to realize something is going to go wrong:
So, clearly there is a problem here in need of a well-designed solution. Got any ideas?
-
oFavorite This
-
Q7Comment
Directory Company Profiles
Core77
Industrial Design
Resources
Industrial Design
Resources
-
Core77 Directory
Find the Best Industrial Design CompaniesGo -
ArtefactArtefact is a strategy + design firm. Design is powerful. It determines how we experience life, and ...
-
Pushstart Creative
What is your future in a connected world? We create impactful strategies and build beautiful connec...
-
Anvil Studios, Inc
Anvil Studios is a product design firm for the real world. Anvil is Treasure Hinds and Greg Janky. ...
-
Pq Design Group
PQ Design Group is the preferred partner for ambitious startups and global brands, offering a pragma...
-
Spatial Dynamics
Spatial Dynamics is a hardware product design and development agency located in Cambridge, Massachus...
-
James Owen Design
We've been creating brands, designing and developing new products, and destroying mediocrity for ove...
-
Jackson Hedden Inc
We design unique products for startups, companies, and everything in between. We believe good design...
K
{Welcome
Create a Core77 Account
Already have an account? Sign In
By creating a Core77 account you confirm that you accept the Terms of Use
K
Reset Password
Please enter your email and we will send an email to reset your password.
Comments
Sounds like setting the wire could be a job for a drone...
You may not need to worry about snow load if it's not piled high. Most roofs can handle 20-40 lbs per square foot.
You can try the wire under the snow on the roof trick without clumping the roof if you throw the string over the roof.
Can we add this on our roofing blog at http://allstarsroofing.com as well? Thanks for the information
Can we add this on our roofing blog at http://allstarsroofing.com">oakville roofing as well? Thanks for the information
In Japan I noticed that almost all the roofs had notches near the edges, staggered. It seems like they could be used to hold the main pack of snow back from the edge a little, so that a small amount falls down, exposing the area where an ice dam would form. I'm trying to find some information on it now, very interesting.
Note that, to prevent ice damming, you only need to remove the snow near the roof edge or gutter. About 2 feet or half a meter is enough. That basic blue roof rake goes a little farther up than that.